Mapping binary file failed Delphi RIO10.3.3, Madexcept 5.0.0
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
Yes it was a space between the parameters, sorry again...
the result with space :
D:\>"C:\Program Files (x86)\madCollection\madExcept\Tools\madExceptPatch.exe" "D:\todel\todel.exe" /dontCheckRtl /RestoreFileTime
No map file found.
D:\>
d:\todel contains :
todel.dpr
todel.dproj
todel.dproj.local
todel.exe
todel.identcache
todel.res
utodel.dcu
utodel.dfm
utodel.pas
the result with space :
D:\>"C:\Program Files (x86)\madCollection\madExcept\Tools\madExceptPatch.exe" "D:\todel\todel.exe" /dontCheckRtl /RestoreFileTime
No map file found.
D:\>
d:\todel contains :
todel.dpr
todel.dproj
todel.dproj.local
todel.exe
todel.identcache
todel.res
utodel.dcu
utodel.dfm
utodel.pas
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
IT WORKS!
drc and map files were not generated.
After doing :
project
- option
- compiler
- linker
- map file : passed from disabled to detailed
the drc and map files have been generated and everything works perfectly.
I guess in the message "[madExcept Avertissement] Mapping binary file failed (2)"
(2) represented the number of missing files?
Our exchange was very fruitful.
thank you so much
drc and map files were not generated.
After doing :
project
- option
- compiler
- linker
- map file : passed from disabled to detailed
the drc and map files have been generated and everything works perfectly.
I guess in the message "[madExcept Avertissement] Mapping binary file failed (2)"
(2) represented the number of missing files?
Our exchange was very fruitful.
thank you so much
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
IT WORKS!
drc and map files were not generated.
After doing :
project
- option
- compiler
- linker
- map file : passed from disabled to detailed
the drc and map files have been generated and everything works perfectly.
I guess in the message "[madExcept Avertissement] Mapping binary file failed (2)"
(2) represented the number of missing files?
Our exchange was very fruitful.
thank you so much
drc and map files were not generated.
After doing :
project
- option
- compiler
- linker
- map file : passed from disabled to detailed
the drc and map files have been generated and everything works perfectly.
I guess in the message "[madExcept Avertissement] Mapping binary file failed (2)"
(2) represented the number of missing files?
Our exchange was very fruitful.
thank you so much
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
The (2) is the error code. ERROR_FILE_NOT_FOUND = 2. So it seems it was the map file which was not found.
What I don't understand, though, is that the madExcept IDE wizard is supposed to automatically switch the map file option to "detailed" before you compile. I don't know why that didn't work! It should have...
What I don't understand, though, is that the madExcept IDE wizard is supposed to automatically switch the map file option to "detailed" before you compile. I don't know why that didn't work! It should have...
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
As a crazy 'clicker', it is possible that I mistakenly disabled this option.
One last question:
Does MadExcept also work with a program compiled in release version?
One last question:
Does MadExcept also work with a program compiled in release version?
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
It shouldn't matter if you disable it, madExcept should re-enable it again behind your back the next time you compile. At least in theory.
Yes, madExcept should also work for release builds.
Yes, madExcept should also work for release builds.
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
P.S: You didn't uncheck "adjust compiler & linker options" here, did you?
http://help.madshi.net/madExceptConfiguration.htm
http://help.madshi.net/madExceptConfiguration.htm
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
shame on me
only enable IDE exception catching is checked ....
but one thing : enable Unicode hack for setting dialog is in grey (disabled?)
only enable IDE exception catching is checked ....
but one thing : enable Unicode hack for setting dialog is in grey (disabled?)
Re: Mapping binary file failed Delphi RIO10.3.3, Madexcept 5
Haha! Now who pays me for my support hours? Just kidding, of course...
"Enable Unicode hack" is only for old Delphi versions which didn't native support Unicode.
"Enable Unicode hack" is only for old Delphi versions which didn't native support Unicode.