problems with 4.0.1, 4.0.2 and Windows 10 x86
-
- Posts: 42
- Joined: Fri Jul 07, 2006 2:50 am
problems with 4.0.1, 4.0.2 and Windows 10 x86
Hi Madshi,
we have experienced problems with permanent dll injection with the latest releases on Windows 10 x86. Even if the injected dll does nothing, after reboot a CRITICAL_PROCESS_DIED BSOD would occur.
I am using the following API to register the injection:
InjectLibrary(INJECTION_DRIVER_NAME, INJECTION_DLL, ALL_SESSIONS, TRUE, TRUE, NULL);
Reverting back to madCodeHook 4.0 fixed this problem.
we have experienced problems with permanent dll injection with the latest releases on Windows 10 x86. Even if the injected dll does nothing, after reboot a CRITICAL_PROCESS_DIED BSOD would occur.
I am using the following API to register the injection:
InjectLibrary(INJECTION_DRIVER_NAME, INJECTION_DLL, ALL_SESSIONS, TRUE, TRUE, NULL);
Reverting back to madCodeHook 4.0 fixed this problem.
-
- Posts: 42
- Joined: Fri Jul 07, 2006 2:50 am
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
same problem with beta
-
- Posts: 42
- Joined: Fri Jul 07, 2006 2:50 am
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
when investigating the problem I was slowing figuring out the process names that were causing the problem before I reverted to 4.0. If the exclude mask was "dwm.exe|fontdrvhost.exe|log*.exe|lsass.exe|s*.exe|w*.exe", Windows started normally. Hope this helps.
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
I'm aware of problems with fontdrvhost.exe, but these should be fixed in the latest beta. Did you also update the drivers, when testing the latest beta?
-
- Posts: 42
- Joined: Fri Jul 07, 2006 2:50 am
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
When I tested the beta, I updated everything but I didn't use an exclude mask when injecting.
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
Argh, that's bad to hear...
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
How about this build, does it fix the problem without needing the exclusions?
http://madshi.net/madCollectionBeta.exe (installer 2.8.2.13)
http://madshi.net/madCollectionBeta.exe (installer 2.8.2.13)
-
- Posts: 42
- Joined: Fri Jul 07, 2006 2:50 am
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
no, still the same problem with madCollectionBeta.exe (2.8.3.0)
Re: problems with 4.0.1, 4.0.2 and Windows 10 x86
That is surprising, and disappointing. You did update the driver, too?